Freelander Service Procedures
FRONT SUSPENSION
REPAIRS
60-5
18. Remove bearing sealing plate from inner track.
19. Position drive flange in a vice.
20. Clamp both halves of a suitable bearing
separator around inner track ensuring that
inner lip fits in groove on inner track.
From 2002MY the groove in the inner track was
deleted. To remove the inner track, clamp the
separator around the bearing inner track
surface.
21. Using tool LRT-99-500 and thrust pad LRT-54-
014 withdraw inner track from drive flange.
22. Remove circlip from bearing.
23. Position hub to press and press out bearing
using tool LRT-54-015 and LRT-54-017,
discard bearing.
CAUTION: Never re-use existing bearing.