Freelander Service Procedures
FUEL DELIVERY SYSTEM - PETROL
ADJUSTMENTS
19-2-5
Fuel system - pressure test - KV6 - NAS
$% 19.50.13
Remove
1. Remove acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
2. Position absorbent cloth beneath fuel rail.
WARNING: Fuel vapour is highly flammable
and in confined spaces is also explosive
and toxic. Always have a fire extinguisher
containing foam, CO
2
, gas or powder close
at hand when handling or draining fuel.
3. Up to 03MY: Remove nut and bolt securing coil
and position coil aside.
4. Connect adaptor LRT-19-006, to pressure
gauge LRT-19-004 .
5. Remove schraeder valve cap.
6. Connect pressure gauge to fuel rail schraeder
valve.
7. Start engine. Pressure at idle = 3.4 bar. If
pressure is below 3.4 bar, suspect the following
in order: fuel hoses, filter, regulator and pump.
Refit
1. Stop engine.
2. Disconnect pressure gauge LRT-19-006 and
adapter LRT-19-004 from fuel rail.
3. Up to 03MY: Fit and tighten nut and bolt
securing coil.
4. Fit acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
Fuel system - pressure test - K1.8
$% 19.50.13
Check
1. Disconnect battery earth lead.
2. Position absorbent cloth beneath fuel pipe to
catch spillage.
WARNING: The spilling of fuel is
unavoidable during this operation. Ensure
that all necessary precautions are taken to
prevent fire and explosion.
3. Disconnect fuel pipe from inlet manifold.
4. Connect LRT-19-004A to manifold and fuel
pipe.
Note:: LRT-19-004X can be used as an
alternative.
5. Connect battery earth lead.
6. Start engine. Pressure at idle = 3.6 bar
±
0.2
bar.
7. Stop engine. If pressure is out of tolerance
suspect the following in order: fuel hoses, filter
and pump.
8. Remove plug, reconnect vacuum hose and
secure hose with clip.
9. Disconnect battery earth lead.
10. Disconnect LRT-19-004A from fuel pipe and
inlet manifold.
11. Connect fuel pipe to manifold.
12. Connect battery earth lead.
LRT - 19 -004A
M19 3675