Freelander Service Procedures
FUEL DELIVERY SYSTEM - PETROL
19-2-28 REPAIRS
Filter - main
$% 19.25.02
Remove
1. Disconnect battery earth lead.
2. Remove sender unit.
3. Disconnect 2 Lucars from top of pump unit
assembly.
4. Release 3 slots in top of pump unit assembly
from lugs in base.
5. Carefully manoeuvre top of pump unit
assembly away from base, ensuring that fuel
feed hose does not become strained.
6. Collect compression spring from fuel filter.
7. Carefully release 3 sprag clips securing fuel
filter.
8. Release fuel filter from inlet and outlet
connections.
9. Remove fuel filter.
10. Collect 'O' rings.
Refit
1. Lubricate NEW 'O' rings with silicone grease
and fit to ports.
2. Carefully fit fuel filter to ports and push fully
home, ensuring that sprag clips engage fully.
WARNING: Ensure earthing spring fitted to
fuel pressure regulator is correctly located.
3. Position spring to fuel filter recess and engage
in top location.
WARNING: Ensure that filter earthing tag is
correctly located to contact the base of fuel
filter.
4. Engage pump top to base, ensuring that slots
engage correctly with lugs.
WARNING: During refit, ensure that all
electrical connections are made correctly.
Earth tag on fuel pump negative terminal
must not become distorted.
5. Fit sender unit.
6. Connect battery earth lead.