Freelander Service Procedures
FUEL DELIVERY SYSTEM - PETROL
REPAIRS 19-2-15
Sensor - heated oxygen (H02S) - pre-
catalyst - RH - KV6 - Non NAS
$% 19.22.17
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove LH front road wheel.
3. Release RH HO2S multiplug from coolant rail
bracket and disconnect multiplug.
4. Remove HO2S from RH exhaust manifold.
Refit
1. Clean HO2S and exhaust manifold mating
face.
2. Fit HO2S and tighten to 55 Nm (41 lbf.ft).
3. Connect RH HO2S multiplug, secure multiplug
in coolant rail bracket.
4. Fit LH front road wheel and tighten nuts to 115
Nm (85 lbf.ft).
5. Remove stands and lower vehicle.
M30 0996
