Freelander Service Procedures
HOOD
REPAIRS
76-7-9
Catch and retainer - hard-back - rear
$% 76.61.95
Remove
1. Remove hard-back or soft-back.
HOOD, REPAIRS, Hard top - remove
HOOD, REPAIRS, Hard top - remove
2. Remove 2 screws securing 'E' post finisher,
release finisher from 2 clips and remove
finisher.
3. Remove 3 Torx screws securing catch and
remove catch.
4. Remove lower rear quarter trim casing.
REPAIRS, Trim casing - rear quarter - lower
- 3 door.
5. Remove 3 Torx screws securing hard-back
retainer and remove retainer.
Refit
1. Position catch, fit Torx screws and tighten to
10Nm (7.5 lbf.ft).
2. Position 'E' post finisher, engage in clips and
secure with screws.
3. Position hard-back retainer, fit Torx screws
and tighten to 10 Nm (7.5 lbf.ft).
4. Fit lower rear quarter trim casing.
REPAIRS, Trim casing - rear quarter - lower
- 3 door.
5. Fit hard-back or soft-back.