Freelander Service Procedures
REAR SUSPENSION
64-14
REPAIRS
10. Loosen 6 bolts securing mountings to
differential casing.
Refit
1. Position centralising jig LRT-51-013 to align
differential assembly.
2. Fit differential assembly.
3. Fit bolts securing differential mountings to
subframe and tighten to 120 Nm (89 lbf.ft).
4. Tighten forward bolts to 65 Nm (48 lbf.ft).
5. Tighten rearward bolts to 65 Nm (48 lbf.ft).
6. Remove LRT-51-013.
7. With assistance position subframe assembly to
body and locate on dowels.
8. Fit subframe bolts and tighten to 190 Nm (140
lbf.ft).
9. Align handbrake cables, fit bolts and tighten to
22 Nm (16 lbf.ft).
10. Connect breather pipe.
11. Position propeller shaft to rear axle and align
reference marks.
12. Fit nuts and bolts securing propeller shaft to
rear axle and tighten to 65 Nm (48 lbf.ft).
13. Fit drive shafts.
14. Check and if necessary, adjust wheel
alignment.