Freelander Service Procedures
REAR SUSPENSION
REPAIRS
64-13
Sub frame
$% 64.35.78
Remove
1. Remove both drive shafts.
2. Reference mark rear propeller shaft for
reassembly.
3. Remove 4 nuts and bolts securing propeller
shaft to differential. Release propeller shaft and
tie aside.
4. Depress red locking collar and disconnect
breather pipe from differential casing.
5. Support the weight of the subframe assembly
on a jack.
6. Remove 2 bolts securing handbrake cable clips
to subframe.
7. Remove 4 bolts securing subframe to body.
8. With assistance lower jack, manoeuvre
subframe around exhaust and remove from
vehicle.
NOTE: Do not carry out further dismantling if
component is removed for access only.
9. Remove 3 bolts securing differential mountings
to subframe and remove differential assembly.