Freelander Service Procedures
RESTRAINT SYSTEMS
REPAIRS
75-7
Stalk - rear seat belt - LH - 5 door
$% 76.73.32
Remove
1. Fold rear seat forward.
2. Remove 3 screws from end cover and remove
cover from seat hinge.
3. Remove 4 Torx bolts from seat lock down catch
and remove catch assembly.
4. Remove Torx bolt from seat belt buckle and
remove buckle.
Refit
1. Fit buckle to catch assembly and tighten Torx
bolt to 32 Nm (24 lbf.ft).
2. Fit catch assembly to seat and tighten Torx
bolts.
3. Fit catch assembly to seat, fit Torx bolts but do
not tighten at this stage.
4. Fold seat down and check that seat unfolds on
lock down bar correctly. Adjust catch assembly
if required.
5. Tighten catch Torx bolts to 32 Nm (24 lbf.ft).
6. Recheck seat fold.
7. Fit end cover and tighten screws.
8. Reposition rear seats.