Freelander Service Procedures
STEERING
57-12
REPAIRS
Pump - steering - KV6
$% 57.20.14
Remove
1. Disconnect battery earth lead.
2. Remove engine mounting top arm.
ENGINE - K SERIES KV6, REPAIRS,
Arm assembly - engine mounting RH.
3. Loosen PAS pump pulley bolts.
4. Using a 3/8" socket bar, raise ancillary drive
belt tensioner and release drive belt from
alternator and PAS pump pulleys.
5. Position container to collect PAS fluid spillage.
6. Release clip and disconnect fluid inlet hose
from PAS pump.
7. Remove banjo bolt securing fluid outlet hose to
PAS pump, release hose, remove and discard
sealing washers.
CAUTION: To prevent damage to
components, use two spanners when
loosening or tightening unions.
8. Remove bolt securing PAS outlet pipe support
bracket to cylinder head and move pipe aside.
9. Remove 3 bolts securing PAS pump pulley to
PAS pump and remove pulley.
CAUTION: Always fit plugs to open
connections to prevent contamination.