LR3/Disco 3
5 .
Using the special tools, install the halfshaft in the wheel hub.
6 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature
failure of the joint.
Connect the lower arm to the wheel knuckle.
Tighten to 275 Nm (203 lb.ft).
7 .
Install a new halfshaft retaining nut and lightly tighten.
8 .
Connect the toe link.
Tighten the bolt to 175 Nm (129 lb.ft).
9 .
Secure the parking brake cable to the lower arm.
10 .
Install the stabilizer bar link. For additional information, refer to
Stabilizer Bar Link (64.35.24)
(Section 204-02)
11 .
Tighten the halfshaft retaining nut to 350 Nm (258 lb.ft).
Stake the nut to the halfshaft.
12 .
Install the wheel and tire.
Tighten the wheel nuts to 140 Nm (103 lb.ft).
13 .
CAUTION: Do not fill the differential with lubricant up to the filler plug. The filler plug is only
used to fill the differentail with lubricant, and not to act as a level indicator.