LR3/Disco 3
Tighten the Torx bolts to 3 Nm (2 lb.ft).
12 .
Connect the clockspring and multifunction switch electrical connectors.
13 .
Install the steering column side trim panels.
Secure with the clips.
14 .
Install the steering column shrouds.
15 .
Install the instrument panel access panel.
Secure with the clips.
16 .
Install the closing trim panel.
Connect the electrical connector.
Secure the clip.
Tighten the screws.
17 .
Install the steering wheel. For additional information, refer to
Steering Wheel (57.61.01)
(Section
211-04)
18 .
Install the driver side register trim panel. For additional information, refer to
Driver Side Register
Trim Panel (76.46.12)
(Section 412-01)
19 .
Initiate a new steering angle sensor using T4.