LR3/Disco 3
Lubricate the components with clean engine oil.
3 .
NOTE :
After installing the bolts check the camshaft is free to rotate.
Install the camshaft oil supply line.
Thoroughly clean and inspect the oil supply line.
Prime the oil supply line with clean engine oil.
Working in a diagonal sequence, evenly and progressively tighten the bolts in 2 stages.
Tighten the bolts to 6 Nm (4 lb.ft).
Tighten the bolts to 16 Nm (12 lb.ft).
4 .
Install the camshaft sprocket bolt.
Install the bolt, but do not tighten fully at this stage.
5 .
Adjust the valve timing. For additional information, refer to (Section 303-01)
6 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
