LR3/Disco 3
Remove the oil temperature sensor.
Disconnect the electrical connector.
Remove and discard the O-ring seal.
12 .
Remove the oil strainer pick-up assembly.
Remove the bolt.
Remove and discard the 2 O-ring seals.
13 .
Remove the dipstick.
14 .
Tie the transmiss fluid lines and the engine harness clear of the cylinder block cradle flange.
15 .
NOTE :
Note the fitted position of the 2 sealing washers.
Remove the 8 cylinder block cradle bolts.
Remove and discard the 2 sealing washers.
16 .