LR3/Disco 3
Installation
CAUTION: Failure to loosen the set screws may result in damage to the cylinder block cradle.
Using the special tool, loosen the 8 cylinder block cradle set screws.
17 .
Remove the cylinder block cradle.
Remove the 2 rear bolts.
Remove the 2 Torx screws.
Remove the 2 nuts.
Remove the 20 bolts.
Remove and discard the gasket.
1 .
Clean the cylinder block cradle.
Clean the component mating faces.
Remove the sealant from the main bearing cap cavities.