LR3/Disco 3
Install new O-ring seals.
Tighten the bolt to 10 Nm (7 lb.ft).
12 .
Install the oil pan. For additional information, refer to
Oil Pan (12.60.44)
(Section 303-01)
13 .
Install the dipstick.
Clean the component.
14 .
Position the engine oil cooler lines.
Tighten the bolt and the nut to 25 Nm (18 lb.ft).
15 .
Attach the transmission fluid lines.
Clean the components.
Install the new O-ring seals.
Secure with the clip.
Tighten the bolt to 10 Nm (7 lb.ft).
16 .
Install the starter motor. For additional information, refer to
Starter Motor (86.60.01)
(Section 303-
06)
17 .
Install the front stabilizer bar. For additional information, refer to
Stabilizer Bar (60.10.01)
(Section
204-01)
18 .
Install the front axle tube. For additional information, refer to
Axle Tube (47.10.42)
(Section 205-03)
19 .
Install the radiator access panel.
Tighten the 4 bolts to 10 Nm (7 lb.ft).
20 .
Install the front wheels and tires.
21 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
22 .
Check and top-up the transmission fluid level. For additional information, refer to
Transmission
Fluid Level Check (44.24.06)
(Section 307-01)