LR3/Disco 3
Installation
19 .
Remove the RH valve cover. For additional information, refer to
Valve Cover RH (12.29.44)
(Section 303-01)
20 .
Remove the LH valve cover. For additional information, refer to
Valve Cover LH (12.29.43)
(Section
303-01)
21 .
Remove the engine front cover.
Release the engine wiring harness clips.
Remove the 24 bolts.
Remove and discard the gasket.
1 .
Install the engine front cover.
Clean the component mating faces.
Apply a bead of sealant 3 mm diameter, by 12 mm long, to the 8 places indicated.