LR3/Disco 3
Selector Lever Cable (44.15.08)
Removal
Installation
Published : May 10, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the transmission selector lever. For additional information, refer to (Section 307-01)
3 .
Remove the selector lever cable.
Remove the clip.
Release the cable.
1 .
Install the selector lever cable.
Clean the components.
Secure the cable.
Install the clip.
2 .
Install the transmission selector lever. For additional information, refer to (Section 307-01)