LT230Q Transfer Box Overhaul - Transfer Box Dismantling | Page 35
TRANSFER BOX
4
OVERHAUL
24. Remove 6 bolts securing high/low cross shaft
housing.
25. Remove cross shaft housing.
CAUTION: Do not carry out further
dismantling of cross shaft housing at this
stage.
26. Slacken locknut and remove differential lock
warning lamp switch from front output housing.
27. Clean sealant from threads of switch and
output housing.
28. Noting fitted position of longest bolt, remove 8
bolts securing front output housing to main
casing.
29. Remove front output housing.
NOTE: Dowel located.
CAUTION: Do not carry out further
dismantling of front output housing at this
stage.