Range Rover P38
AIR CONDITIONING
3
REPAIR
6. Turn sensor anti-clockwise. Release from
recirculation flap housing.
7. Remove sensor from multiplug.
Refit
8. Reverse removal procedure.
NOTE:
LHD only: Tighten nut on LH wiper
spindle to
11 Nm (8 lbf.ft)
AMBIENT TEMPERATURE SENSOR - FROM VIN
381431
Service repair no - 82.20.91
Remove
1. Remove front bumper valance.
See CHASSIS
AND BODY, Repair.
2. Disconnect multiplug from sensor.
3. Release sensor locating lug from hole in sensor
mounting bracket, rotate and remove sensor.
Refit
4. Fit sensor to mounting bracket, ensuring that
locating lug is fully engaged.
5. Connect multiplug to sensor.
6. Fit front bumper valance.
See CHASSIS AND
BODY, Repair.
