Range Rover (LM) V8-4.4L (2009)
Air Door Actuator / Motor: Service and Repair
Auxiliary Footwell Vent/Duct Blend Door Actuator
Auxiliary Footwell Vent/Duct Blend Door Actuator
Removal
1. Disconnect the battery ground cable.
2. Remove the floor console rear trim panel.
CAUTION: Make sure damage does not occur to the auxiliary temperature blend door actuator link rod.
3. Remove the footwell vent/duct blend door actuator link rod.
-
Disconnect the electrical connector.
4. Remove the footwell vent/duct blend door actuator.
-
Remove the 2 screws.
Installation
1. Install the footwell vent/duct blend door actuator.
-
Install the 2 screws.
CAUTION: Make sure damage does not occur to the auxiliary temperature blend door actuator link rod.
2. Install the footwell vent/duct blend door actuator link rod.
-
Connect the electrical connector.
3. Install the floor console rear trim panel.
4. Connect the battery ground cable.
Auxiliary Temperature Blend Door Actuator
Auxiliary Temperature Blend Door Actuator
Removal
1. Disconnect the battery ground cable.
2. Remove the floor console stowage compartment.
CAUTION: Make sure damage does not occur to the auxiliary temperature blend door actuator link rod.
3. Remove the LH blend door actuator link rod.
-
Disconnect the electrical connector.