Range Rover (LM) V8-4.4L (2009)
5. Release the CJB from the in-vehicle crossbeam.
^
Remove the 4 screws.
Right-hand drive vehicles
NOTE: Left-hand shown, right-hand similar.
6. Remove the driver side floor console extension.
^
Remove the screw.
^
Release the 2 clips.
7. Release the driver side closing trim panel.
^
Remove the 4 screws.
^
Remove the clip.
8. Remove the driver side closing trim panel.
^
Disconnect the 2 electrical connectors.
^
Release the vehicle diagnostic socket.
All vehicles
9. Remove the recirculation blend door actuator.
^
Disconnect the electrical connector.
Installation
All vehicles