HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(a) Connect the cable to the negative (-) battery terminal See: Starting and Charging/Battery/Service and Repair/Installation.
5. BLEED BRAKE LINE See: Brake Bleeding/Service and Repair
6. PERFORM INITIALIZATION AND CALIBRATION OF LINEAR SOLENOID VALVE
HINT
If the brake control has been disabled, make sure to perform initialization and calibration of the linear solenoid valve See: Antilock
Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning/Initialization.
7. INSTALL FRONT WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)