HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Brake Hose/Line: Service and Repair
Rear Brake Flexible Hose
Components
BRAKE (REAR): REAR BRAKE FLEXIBLE HOSE: COMPONENTS
Removal
BRAKE (REAR): REAR BRAKE FLEXIBLE HOSE: REMOVAL
NOTICE:
If both left and right hoses are disconnected at the same time, be sure to place identification marks indicating the position on each
side.
HINT
*
Use the same procedure for the LH side and RH side.
*
The following procedure is for the LH side.
1. DISABLE BRAKE CONTROL See: Power Brake Assist/Vacuum Brake Booster/Service and Repair/Removal
2. REMOVE REAR WHEEL
3. DRAIN BRAKE FLUID
NOTICE:
If brake fluid leaks onto any painted surface, immediately wash it off.
4. REMOVE REAR FLEXIBLE HOSE
(a) Remove the union bolt and gasket, and separate the rear flexible hose.
(b) Using a union nut wrench, disconnect the brake line while holding the rear flexible hose with a wrench.