B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Fuel Line Coupler: Service and Repair
Push Connect Fittings
Disconnect
1. Relieve the fuel pressure.
See: Fuel Filter/Fuel Pressure Release
2. Disconnect the safety clip from the male hose.
3. Install the SST and push into the fitting.
4. Separate the fittings. Inspect for damage. Clean the fittings.
Connect
NOTE: Lubricate the tube end with clean engine oil to ease assembly.
1. Align the tube to the fitting and push until you hear a click.
2. Pull on the fitting to make sure it is fully engaged, then install the safety clip.
