B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Fuel Line Coupler: Service and Repair
Spring Lock Couplings
Disconnect
1. Relieve the fuel pressure.
See: Fuel Filter/Fuel Pressure Release
2. Remove the fuel tube clip.
3. Install the appropriate SST.
4. Close and push the SST into the open side of the cage.
5. Separate the fitting.
6. Remove the SST.
Connect
1. Inspect and clean both the coupling ends. Lubricate the O-rings with clean engine oil.
2. Connect the fitting by inserting the male end into the female end of the fitting. Push the fitting together until the garter spring is engaged.
3. Pull on the fitting to make sure it is fully engaged.
4. Install the safety clip.
