B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Fuel Line Coupler: Service and Repair
Hairpin Clip Fitting
Disconnect
1. Remove the shipping tab by bending downward.
2. Spread the hairpin clip legs and push the clip into the fitting.
3. Separate the fitting from the tube.
Connect
1. Inspect the fitting and the tube for damage. Remove any dirt or obstructions.
2. Apply a light coat of clean engine oil to the male tube end.
3. Insert the hairpin clip into the fitting.
4. Align the tube and the fitting.
5. Insert the tube in the fitting and push together until a click is heard.
6. Pull on the connection to make sure it is fully engaged.