B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
l.
Ensure the dark color plastic converter relief valve and spring is in their proper location.
m.
Ensure the extension housing lube orifice is in its proper location.
NOTE:
Apply petroleum jelly on the valve body separator plate to hold it in place on the main control.
NOTE:
Use new bonded separator plate to main control.
n.
Install the main control valve body separator plate with hole # )50 deleted, to the main control. Refer to parts information below to select
correct separator plate for your application.
o.
Install SST Alignment Pins (307-333 and 307-334) into the main control valve body.
NOTE:
It is important to properly align components using SST Alignment Pins (307-333 and 307-334 or equivalent).
