B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Seals and Gaskets: Service and Repair
Rear Differential Pinion Seal
REAR PINION SEAL REMOVAL / INSTALLATION
REMOVAL NOTE
1. Remove the rear axle companion flange.
2. Pry up on the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer until the rear axle drive pinion seal is
removed.
INSTALLATION NOTE
1. Lubricate the new rear axle drive pinion seal.
CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and replace.
2. Use the Special Service Tool (SST) 49 M005 796 or equivalent to install the rear axle drive pinion seal.
3. Install the companion flange.
