CX-7 L4-2.3L Turbo (2007)
5.
Remove masking tape protecting black painted door sash area.
6.
Tighten door latch handle screw and install cover.
7.
Tighten armrest screw and install cover (check cover facing up and proper position).
8.
Tighten two (2) passenger side grip handle screws and install plastic handle cover.
9.
Install front A-pillar inner garnish cover.
10.
Perform "Power Window Initialization Procedure" (below) to restore "anti-pinch" and "auto open/close" window features before returning vehicle
to customer or dealer inventory.
POWER WINDOW INITIALIZATION PROCEDURE
1.
Turn ignition to ON position.
2.
From driver seat ensure window lockout switch is NOT depressed.
3.
Press window switch down to fully open door window.
4.
Pull window switch up to fully close door window; hold switch up for two (2) seconds; release switch.
5.
Move to front passenger seat and repeat Steps 3 - 4 on passenger window switch.
6.
Verify proper window operation using each door switch.
