Water Pump
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Assembly › Water Pump
EngineWater Pump
Caution
• Do not scratch the oil pump.
- Cut away the portion of the gasket that projects from the body toward the oil pan side.
Water Pump
- Remove all foreign material from the water pump mounting surface.
- Install the water pump and a new gasket.
Tightening torque:
19—25 N·m (1.9—2.6 m-kg, 14—19 ft-lb)
Oil Pan Baffle
- Remove all foreign material from the contact surfaces.
Caution
• The oil pan must be secured within 30 minutes after the sealant is applied to the baffle.
- Apply a continuous bead of silicone sealant to the baffle along the inside of the bolt holes.
- Install the baffle.
Oil Strainer
- Install the oil strainer and a new gasket.
Tightening torque:
7.8—11 N·m (80—110 cm-kg, 69—95 in-lb)
Oil Pan
- Remove all foreign material from the contact surfaces.
- Apply silicone sealant to the shaded areas shown in the figure.
Parts & tools for this job For 1990 Mazda MX-5
- FLUIDCoolantSearch: Mazda coolant antifreeze
- PARTThermostatSearch: Mazda MX-5 1990 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.