Drive belt
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- B Engine (B) › Drive belt
EngineDrive belt
Drive belt
- Install the alternator drive belt.
- Install the P/S and/or A/C drive belt.
- Adjust the drive belt deflections, and tighten the alternator and P/S mounting bolts and nuts. (Refer to page B–6.)
Radiator and cooling fan assembly
- Install the radiator and cooling fan assembly.
Tightening torque:
19—25 N·m (1.9—2.6 m-kg, 14—19 ft-lb)
- Tighten the A/C pipe bracket to the radiator.
Tightening torque:
7.8—11 N·m (80—110 cm-kg, 69—95 in-lb)
- Connect the upper and lower radiator hoses.
Caution
- Position the hose clamp in the original location on the hose, and squeeze the clamp lightly with large pliers to ensure a good fit.
- Connect the coolant reservoir hose.
- Connect the cooling fan connector.
Accelerator cable
- Install the accelerator cable.
- Adjust the cable deflection by turning nut A.
Deflection: 1—3mm (0.04—0.12 in)
Air cleaner assembly
- Install the air cleaner assembly.
Tightening torque
19—25 N·m (1.9—2.6 m-kg, 14—19 ft-lb)
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.