5. Measure the journal diameters in X and Y directions at the two points (A and B) shown.
**Diameter:**
25.940—25.965mm (1.0213—1.0222 in)
**Out-of-round:** 0.05mm (0.002 in) max.
6. Measure the camshaft journal oil clearances.
**Caution**
• **Do not install the HLA when measuring the oil clearance.**
(1) Remove all foreign material and oil from the journals and bearing surface.
(2) Set the camshaft onto the cylinder head.
(3) Position Plastigage atop the journals in the axial direction.
(4) Install the camshaft caps according to the cap number and arrow mark.
(5) Install the camshaft cap bolts and tighten them in two or three steps in the order shown in the figure.
**Tightening torque:**
11.3—14.2 N·m (1.15—1.45 m·kg, 100—126 in-lb)
(6) Loosen the camshaft cap bolts in two or three steps in the order shown in the figure.
(7) Remove the camshaft caps.
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.
Help keep workshop manuals free
workshop-manuals.com provides free online workshop manuals.
If they helped you fix your car, please consider sharing or
making a small donation to keep the servers running.