Inspection / repair
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- B Engine (B) › Inspection / repair
EngineInspection / repair
05U0BX-135
05U0BX-136
05U0BX-137
05U0BX-138
05U0BX-139
INSPECTION / REPAIR
- Measure the protruding length (dimension L) of the valve stem.
Dimension L: 43.5mm (1.713 in)
- If L is 43.5—44.0mm (1.713—1.732 in), no correction needed.
- If L is 44.1—45.0mm (1.736—1.772 in), adjust with washer on spring seat area of cylinder head.
- If L is 45.1mm (1.776 in) or more, replace cylinder head.
Valve Spring
- Inspect each valve spring for cracks or damage.
- Measure the free length and out-of-square. Replace the valve spring if necessary.
Free length
Standard
IN : 48.0mm (1.890 in)
EX: 48.3mm (1.902 in)
Minimum
IN : 47.0mm (1.850 in)
EX: 47.3mm (1.862 in)
Out-of-square
IN : 1.68mm (0.0661 in) max.
EX: 1.69mm (0.0665 in) max.
CAMSHAFT
- Set the front and rear journals on V-blocks.
- Measure the camshaft runout. Replace the camshaft if necessary.
Runout: 0.03mm (0.0012 in) max.
- Inspect the camshaft for wear or damage. Replace the camshaft if necessary.
- Measure the cam lobe heights at the two points as shown.
Height
Standard
IN : 40.888mm (1.6098 in)
EX: 40.889mm (1.6098 in)
Minimum
IN : 40.688mm (1.6019 in)
EX: 40.689mm (1.6019 in)
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.