Cylinder bore
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Cylinder bore (B) › Cylinder bore
EngineCylinder bore
Cylinder bore
| mm (in) | |
|---|---|
| Bore size | Diameter |
| Standard | 78.006—78.013 (3.0711—3.0714) |
| 0.25 (0.010) oversize | 78.256—78.263 (3.0809—3.0812) |
| 0.50 (0.020) oversize | 78.506—78.513 (3.0908—3.0911) |
Caution
- The boring size should be based on the size of an oversize piston and be the same for all cylinders.
- If the cylinder bore exceeds the maximum, refluence the cylinder to oversize.
- If the difference between measurements A and C exceeds the maximum taper, refluence the cylinder to oversize.
Taper: 0.019mm (0.0007 in) max.
- If the difference between measurements X and Y exceeds the maximum out-of-round, refluence the cylinder to oversize.
Out-of-round: 0.019mm (0.0007 in) max.
5. If the upper part of a cylinder wall shows uneven wear, remove the ridge with a ridge reamer.OIL JET
- Push the check ball and verify that it moves smoothly.
- Blow through the oil jet and verify that air flows.
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.