Replacement
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- CYLINDER HEAD GASKET Replacement › Replacement
Replacement
Warning
• Release the fuel pressure. (Refer to page F–101.)
• Keep sparks and open flame away from the fuel area.
Caution
• Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery. (Refer to page T–113.)
• Position the hose clamp in the original location on the hose, and squeeze the clamp lightly with large pliers to ensure a good fit.
- Disconnect the negative battery cable.
- Drain the engine coolant.
- Remove in the order shown in the figure, referring to Removal Note.
- Install in the reverse order of removal, referring to Installation Note.
- Intake manifold assembly
- Cylinder head
- Oil pickup tube
- Gasket
- Timing chain cover
- Oil pump
- Valve cover
- Crankshaft pulley
- Oil strainer
- Bolt threads and seat faces (apply oil)
- Timing chain tensioner
- Replace
7.8—11 N·m
(80—110 cm·kg, 69—95 in·lb)
19—25 (1.9—2.6, 14—19)
7.8—11 N·m
(80—110 cm·kg, 69—95 in·lb)
7.8—11 N·m
(80—110 cm·kg, 69—95 in·lb)
76—81 (7.7—8.3, 56—60)
BOLT THREADS AND SEAT FACES [OIL ICON]
36—54 (3.7—5.5, 27—40)
7.8—11 N·m
(80—110 cm·kg, 69—95 in·lb)
38—46 (3.9—4.7, 28—34)
21—27 (2.1—2.8, 15—20)
31—46 (3.2—4.7, 23—34)
N·m (m·kg, ft·lb)
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.