Removal note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Harnesses › Removal note
EngineRemoval note
Disconnect the harness connectors shown in the figure.
Removal note
Water bypass pipe
- Remove the exhaust manifold nut as shown in the figure.
- Remove the water bypass pipe from the cylinder head assembly.
Cylinder head bolt
- Loosen the cylinder head bolts in two or three steps in the order shown in the figure.
- Remove the cylinder head bolts.
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.