Caution
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Preparation sst › Caution
EngineCaution
F1
| 49 B012 005 Remover & installer, valve guide |
For removal of valve guide | 49 L012 0A0 Installer set, valve seal & valve guide |
For installation of valve guide |
|---|---|---|---|
| 49 L012 002 Body (Part of 49 L012 0A0) |
For installation of valve guide | 49 L012 003 Installer (Part of 49 L012 0A0) |
For installation of valve guide |
| 49 L012 004 Nut (Part of 49 L012 0A0) |
For installation of valve guide | 05U0BX-118 | |
- Clean all parts, being sure to remove all gasket fragments, dirt, oil or grease, carbon, moisture residue, and other foreign materials.
- Inspection and repairs must be performed in the order specified.
Caution
- Do not damage the joints or friction surfaces of aluminum alloy components (such as the cylinder head or pistons).
05U0BX-119
CYLINDER HEAD
- Inspect the cylinder head for damage, cracks, and leakage of water and oil. Replace the cylinder head if necessary.
- Measure the cylinder head distortion in the six directions shown in the figure.
Distortion: 0.15mm (0.006 in) max.
Caution
- Before grinding the cylinder head, check the following and repair or replace the cylinder head as necessary.
Sinking of valve seats
Damage of manifold contact surface
Camshaft oil clearances and end play
- If the cylinder head distortion exceeds specification, grind the cylinder head surface.
If the cylinder head height is not within specification, replace it.
Height: 133.8—134.0mm (5.268—5.276 in)
Grinding: 0.20mm (0.008 in) max.
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.