Preparation sst
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Preparation sst › Preparation sst
EnginePreparation sst
PREPARATION SST
| 05U0BX-173 | |||
|---|---|---|---|
| 49 0221 061A Remover & installer, piston pin |
For removal and installation of piston pin | 49 E301 060 Brake, ring gear |
For prevention of engine rotation |
| 49 E301 061 Body (Part of 49 E301 060) |
For prevention of engine rotation | 49 E301 062 Collar (Part of 49 E301 060) |
For prevention of engine rotation |
| 49 SE01 310 Centering tool, clutch disc |
For installation of clutch disc | 49 L012 0A0 Installer set, valve seal & valve guide |
For installation of valve seal |
| 49 L012 001 Installer (Part of 49 L012 0A0) |
For installation of valve seal | 49 L012 002 Body (Part of 49 L012 0A0) |
For installation of valve seal |
| 49 L012 005 Spacer (Part of 49 L012 0A0) |
For installation of valve seal | 49 0636 100A Arm, valve spring lifter |
For removal and installation of valve |
| 49 B012 006 Pivot, valve spring lifter |
For removal and installation of valve | ||
- Clean all parts before reinstallation.
- Apply new engine oil to all sliding and rotating parts.
- Replace plain bearings if they are peeling, burned, or otherwise damaged.
- Tighten all bolts and nuts to the specified torques.
Caution
• Do not reuse gaskets or oil seals.
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.