Tensioner, idler
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Inspection / repair › Tensioner, idler
EngineTensioner, idler
Caution
• Never forcefully twist, turn inside out, or bend the timing belt.
• Do not allow oil or grease on the belt.
- Replace the timing belt if there is any oil or grease on it.
- Check the timing belt for damage, wear, peeling, cracks, and hardening. Replace the timing belt if necessary.
TENSIONER, IDLER
Caution
• Do not clean the tensioner or idler with cleaning fluids. If necessary, use a soft rag to wipe them clean, and avoid scratching them.
- Check the tensioner and idler for smooth rotation and abnormal noise. Replace the tensioner or idler if necessary.
TENSIONER SPRING
- Measure the free length of the tensioner spring. Replace the tensioner spring if necessary.
Free length: 58.8mm (2.315 in)
PULLEY
Timing Belt Pulley, Camshaft Pulley
Caution
• Do not clean the pulleys with cleaning fluids. If necessary, use a soft rag to wipe them clean, and avoid scratching them.
- Inspect the pulley teeth for wear, deformation, and other damage. Replace the pulley if necessary.
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.