Engine: Specifications
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Specifications › Specifications
EngineSpecifications
SPECIFICATIONS
| Item | Engine | B6 DOHC | |||
|---|---|---|---|---|---|
| Type | Gasoline, 4-cycle | ||||
| Cylinder arrangement and number | In-line, 4-cylinders | ||||
| Combustion chamber | Pentroof | ||||
| Valve system | DOHC, belt-driven | ||||
| Displacement cc (cu in) | 1,597 (97.42) | ||||
| Bore and stroke mm (in) | 78.0 x 83.6 (3.07 x 3.29) | ||||
| Compression ratio | 9.4 | ||||
| Compression pressure kPa (kg/cm², psi)-rpm | 1,324 (13.5, 192)-300 | ||||
| Valve timing | IN | Open BTDC | 5° | ||
| Close ABDC | 51° | ||||
| EX | Open BBDC | 53° | |||
| Close ATDC | 15° | ||||
| Valve clearance mm (in) | IN | 0: Maintenance-free | |||
| EX | 0: Maintenance-free | ||||
| Idle speed rpm | 850 ± 50 (Neutral)* | ||||
| Ignition timing BTDC | 10° ± 1°* | ||||
| Firing order | 1—3—4—2 | ||||
* With System Selector (40-B019-9A0) test switch at SELF TEST.
TROUBLESHOOTING GUIDE
| Problem | Possible Cause | Remedy | Page |
|---|---|---|---|
| Difficult starting | Malfunction of engine-related components | ||
| Burned valve | Replace | B–49 | |
| Worn piston, piston ring, or cylinder | Replace or repair | B–54, 56 | |
| Failed cylinder head gasket | Replace | B–16 | |
| Malfunction of fuel system | Refer to Section F | ||
| Malfunction of ignition system | Refer to Section G | ||
| Poor idling | Malfunction of engine-related components | ||
| Malfunction of HLA* | Replace | B–20 | |
| Poor valve-to-valve seat contact | Replace or repair | B–51 | |
| Failed cylinder head gasket | Replace | B–16 | |
| Malfunction of fuel system | Refer to Section F | ||
| Malfunction of ignition system | Refer to Section G | ||
| Excessive oil consumption | Oil working up | ||
| Worn piston ring groove or sticking piston ring | Replace | B–56 | |
| Worn piston or cylinder | Replace or repair | B–54, 56 | |
| Oil working down | |||
| Worn valve seal | Replace | B–40, 71 | |
| Worn valve stem or guide | Replace | B–49 | |
| Oil leakage | Refer to Section D |
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.