2. Verify that the camshaft pulley marks are aligned with the seal plate marks.
**Caution**
* **For intake side, align the E mark.**
* **For exhaust side, align the I mark.**
3. Install the timing belt so that there is no looseness at the idler side or between the two camshaft pulleys.
**Caution**
* **Do not turn the crankshaft counterclockwise.**
4. Turn the crankshaft two turns clockwise, and align the timing belt pulley mark with the timing mark.
5. Verify that the camshaft pulley marks are aligned with the seal plate marks.
If not aligned, remove the timing belt and repeat from tensioner installation.
6. Turn the crankshaft 1 and 5/6 turn clockwise, and align the timing belt pulley mark with the tension set mark.
7. Loosen the tensioner lock bolt to apply tension to the timing belt.
8. Tighten the tensioner lock bolt.
**Tightening torque:**
**37—52 N·m (3.8—5.3 m·kg, 27—38 ft-lb)**
9. Turn the crankshaft 2 and 1/6 turns clockwise and verify that the timing marks are correctly aligned.
10. Measure the timing belt deflection by applying moderate pressure (**98 N, 10 kg, 22 lb**) midway between the two camshaft pulleys.
If the deflection is not correct, repeat from Step 7 above.
**Deflection:**
**9.0—11.5mm (0.35—0.45 in) at 98 N (10 kg, 22 lb)**
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.
Help keep workshop manuals free
workshop-manuals.com provides free online workshop manuals.
If they helped you fix your car, please consider sharing or
making a small donation to keep the servers running.