Assembly Note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Assembly Note (Oil seal) › Assembly Note
Lubrication systemAssembly Note
Assembly Note
Oil seal
- Apply a small amount of clean engine oil to the lip of a new oil seal.
- Push the oil seal slightly in by hand.
Caution
- The oil seal must be pressed in until it is flush with the edge of the oil pump body.
- Press the oil seal in evenly with a suitable pipe.
Oil seal outer diameter: 44mm (1.73 in)
Parts & tools for this job For 1990 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 1990 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.