Disassembly Note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- D Lubrication system › Disassembly Note
Lubrication systemDisassembly Note
Disassembly Note
Oil seal
- Remove the oil seal with a screwdriver protected with a rag.
INSPECTION
Pressure Spring
- Inspect the spring for weakness or breakage.
- Measure the free length. Replace the spring if necessary.
Free length: 45.5mm (1.791 in)
Rotor Clearance
- Measure the following clearances. Replace the rotor if necessary.
Tooth tip clearance: 0.20mm (0.0079 in) max.
Outer rotor to pump body clearance: 0.22mm (0.0087 in) max.
Side clearance: 0.14mm (0.0055 in) max.
Parts & tools for this job For 1990 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 1990 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.