Removal Note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- D Lubrication system › Removal Note
Lubrication systemRemoval Note
Removal Note
A/C compressor
Caution
• Do not damage the hoses.
- Remove the A/C compressor with the hoses still connected.
- Position the compressor away from the engine and affix it with wire.
Pulley lock bolt
- Hold the timing belt pulley with the SST.
- Connect the SST and loosen the pulley lock bolt.
- Remove the pulley lock bolt.
Timing belt pulley
Note
• If necessary, remove the pulley with a steering wheel puller (commercially available).
- Remove the timing belt pulley.
- Remove the pulley Woodruff key.
Installation Note
Timing belt pulley
- Install the timing belt pulley.
- Install the pulley Woodruff key with the tapered side toward the oil pump body.
Pulley lock bolt
- Install the pulley lock bolt.
- Tighten the pulley lock bolt using the two SST.
Tightening torque:
108—118 N·m (11.0—12.0 m-kg, 80—87 ft-lb)
- Remove the SST.
Parts & tools for this job For 1990 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 1990 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.