Removal Note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- E Cooling system › Removal Note
Cooling systemRemoval Note
Removal Note
P/S oil pump
Caution
• Do not damage the hoses.
- Remove the P/S oil pump with the hoses still connected.
- Position the pump away from the engine and affix it with wire.
Steps After Installation
- Fill the radiator with the specified amount and type of engine coolant. (Refer to page E–5.)
- Connect the negative battery cable.
- Start the engine and check for leaks.
Parts & tools for this job For 1990 Mazda MX-5
- FLUIDCoolantSearch: Mazda coolant antifreeze
- PARTThermostatSearch: Mazda MX-5 1990 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.