System circuit
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- System circuit › System circuit
Cooling systemSystem circuit
SYSTEM CIRCUIT
SYSTEM INSPECTION
- Jump across the fan test (TFA) terminal and the ground (GND) terminal of the diagnosis connector.
- Turn the ignition switch ON and verify that the fan operates. If the fan does not operate, inspect the cooling fan system components and wire harness.
- Remove the radiator cap and place a thermometer in the radiator filler neck.
- Start the engine.
- Verify that the fan operates when the coolant temperature reaches approx. 97°C (207°F). If the fan does not operate, check the water thermoswitch. (Refer to page E–13.)
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.