Fan motor
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Inspection and Replacement › Fan motor
Cooling systemFan motor
FAN MOTOR
INSPECTION
- Check that the battery is fully charged.
- Disconnect the fan motor connector.
- Connect the battery and an ammeter to the fan motor connector.
- Verify that current is as specified.
Current: 5.3—6.5A
- If current is not within specification and/or the fan does not turn smoothly, replace the fan motor.
REPLACEMENT
Caution
• Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery. (Refer to page T–113.)
- Disconnect the negative battery cable.
- Drain the engine coolant.
- Remove in the order shown in the figure.
- Install in the reverse order of removal.
- Cooling fan connector
- Cooling fan
- Radiator cowling
- Fan motor
Parts & tools for this job For 1990 Mazda MX-5
- FLUIDCoolantSearch: Mazda coolant antifreeze
- PARTThermostatSearch: Mazda MX-5 1990 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.