Outline (E): Specifications
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Outline (E) › Specifications
Cooling systemSpecifications
SPECIFICATIONS
| Item | Engine | B6 DOHC | |
|---|---|---|---|
| Cooling system | Water-cooled, forced circulation | ||
| Coolant capacity | liters (US qt, Imp qt) | 6.0 (6.3, 5.3) | |
| Water pump | Type | Centrifugal | |
| Water seal | Unified mechanical seal | ||
| Thermostat | Type | Wax, two-stage | |
| Opening temperature | °C (°F) | Main: 86.5—89.5 (188—193) Sub : 83.5—86.5 (182—188) | |
| Full-open temperature | °C (°F) | 100 (212) | |
| Full-open lift | mm (in) | Main: 8.0 (0.31) min. Sub : 1.5 (0.06) min. | |
| Radiator | Type | Corrugated fin | |
| Cap valve opening pressure | kPa (kg/cm², psi) | 74—103 (0.75—1.05, 11—15) | |
| Cooling fan | Type | Electric | |
| Blade | Outer diameter mm (in) | 320 (12.6) | |
| Number | 5 | ||
| Motor | Capacity W-V | 70-12 | |
| Current A | 5.3—6.5 | ||
TROUBLESHOOTING GUIDE
| Problem | Possible Cause | Remedy | Page |
|---|---|---|---|
| Overheating | Coolant level insufficient | Add | E— 5 |
| Coolant leakage | Repair | — | |
| Radiator fins clogged | Clean | E— 7 | |
| Radiator cap malfunction | Replace | E— 6 | |
| Cooling fan malfunction | Replace | E—11 | |
| Thermostat malfunction | Replace | E— 8 | |
| Water passage clogged | Clean | E— 5 | |
| Water pump malfunction | Replace | E— 9 | |
| Corrosion | Impurities in coolant | Replace | E— 5 |
Parts & tools for this job For 1990 Mazda MX-5
- FLUIDCoolantSearch: Mazda coolant antifreeze
- PARTThermostatSearch: Mazda MX-5 1990 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.