Circuit opening relay
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Circuit opening relay › Circuit opening relay
Fuel and emission control systemsCircuit opening relay
CIRCUIT OPENING RELAY
Inspection
Switching operation
Apply 12V and a ground to the terminals below and check the circuit opening relay operation as described.
| 12V | Grounded | Correct result |
|---|---|---|
| STA | E1 | B-Fp: Continuity |
| B | Fc | Fp: Battery voltage |
If not as specified, replace the circuit opening relay.
Relay circuit
Measure voltage between the terminals and a ground with a voltmeter.
| Condition | Terminal | Fp | Fc | B | STA | E1 |
|---|---|---|---|---|---|---|
| Ignition switch: ON | 0V | 12V | 12V | 0V | 0V | |
| Ignition switch: START | 12V | 0V | 12V | 12V | 0V | |
| At idle | 12V | 0V | 12V | 0V | 0V |
If not as specified, check the related wiring harness.
Resistance
Measure resistance between the terminals with an ohmmeter.
| Between terminals | Resistance (Ω) |
|---|---|
| STA-E1 | 21—43 |
| B-Fc | 109—226 |
| B-Fp | ∞ |
If not as specified, replace the circuit opening relay.
Replacement
- Remove the undercover.
- Remove the circuit opening relay.
- Install in the reverse order of removal.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.