Terminal location
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Control System › Terminal location
Fuel and emission control systemsTerminal location
| Terminal | Input | Output | Connection to | Test condition | Voltage | Remark |
|---|---|---|---|---|---|---|
| 2S | — | — | — | — | — | — |
| 2T | — | — | — | — | — | — |
| 2U | ○ | Injector (Nos.1, 3) (Nos.2, 4) |
Ignition switch ON | Approx. 12V | * Engine Signal Monitor: Green and red lights flash |
|
| Idle | Approx. 12V* | |||||
| 2V | ○ | Deceleration from 3,000 rpm to 1,900 rpm (After warm up) |
Approx. 12V | |||
| 2W | ○ | ISC valve | Ignition switch ON | Approx. 7V | ||
| Idle | Approx. 9V | |||||
| 2X | ○ | Solenoid valve (Purge control) |
Ignition switch ON | Approx. 12V | ||
| Idle | Approx. 12V | |||||
| 2Y | — | — | — | — | — | — |
| 2Z | — | — | — | — | — | — |
Terminal location
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.